for digital ZED UV-sensors
Features
- for use as
- UV-C / temperature monitoring system combinations of up to two - D-SiC sensors (displaying UV values in "W/m²", "mW/cm²" or "%") - D-SLS sensors (displaying UV values in "%") - D-ST sensors (displaying temperature values in "°C" or "°F")
- converter for digital sensor signals for converting the measurement value of D-SiC, D-SLS or D-ST sensors to analog output signals; - PRO30D-I converts to 4-20 mA - PRO30D-U converts to 0-10V (alternatively two separated output signals or one common output forwarding the lower UV value)
- operation hour counter/cycle counter with lamp replacement indication, plain hour counter mode without sensors possible
- system status indication: - multicolor 2-line LCD - green, red and yellow LCD backlight
- system status forwarding: - potential free relay contacts (UV alarm)
- ready for certification according to ÖNORM M5873-1:2020-01-01 and DIN 19294-1: 2020-08
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC and 24V DC von request) |
|---|---|
| operation temperature: | max. 45°C (113°F) |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP00 |
| mounting: | to be installed in a closed cabinet, DIN rail mounting |
| dimensions (LxWxD): | 70 x 95 x 50 mm (2,75 x 3,73 x 1,96 inch) |
ZED UV-Sensors
- ...with digital interface
Control Units
- via 4-20 mA signal output*
- via 0-10V signal output*
- via relay contacts